Tag Archive : sour cherries

/ sour cherries

An image of an antique Enterprise brand hand-crank cherry stoner / pitter

I love my sour cherry trees, and am happy to eat some of the cherries out of hand, but I like to preserve most of them for later use. Pitting sour cherries is a nuisance, though. I’ve purchased a number of cherry pitters over the years, but they seem to be designed for the much larger sweet cherries, and are ineffective and slow. My cherry ‘trees’ are all dwarf sour cherries from the University of Saskatchewan introductions, and both the cherries and the pits are considerably smaller than something like a Bing or Ranier.

With homestead-level volumes of cherries to deal with, a pitter that does one or four cherries at a time isn’t terribly helpful, even if they do manage to pit sour cherries effectively. So I’ve mostly preserved my sour cherry harvests by steam juicing them and making them into jelly, or by fermenting them into wine. While these are fine ways to preserve them, I wanted to be able to make pies, maybe a few jars of jam, and to freeze some cherries for smoothies.

A handful of ripe, dark red dwarf sour cherries, illustrating their size.

This spring, I ordered an antique hand-crank cherry pitter. The particular one I bought was an Enterprise No. 16 Cherry Stoner, but there were several similar ones. Home scale modern pitters all seem to use a plunger to push the pit out through the side of the cherry; these vintage crank pitters use a plate to push the cherry flesh through an opening that is smaller than the cherry pit. The theory looked sound, at least. I found a video of someone from Washington using a crank pitter, and again, it was very encouraging. I wasn’t sure it would work with my non-irrigated, prairie-grown dwarf sour cherries, though.

It’s been a very dry year, here, with plenty of heat, but very little rain. My cherries were ready a bit earlier than usual, and were on the small side. The harvest was also very small; my one mature tree only yielded four pounds, a little under a gallon of fruit. I harvested this week, and decided to try pitting my sour cherries using my new-to-me cherry stoner.

An image showing the set-up of the Enterprise No 16 Stoner, with cherries in the hopper, some pitted cherries in a dish, and another dish catching the pits.

This thing is game-changing, folks! In under an hour, I had the stoner set up, pitted a gallon of cherries, packaged the fruit up for the freezer, and cleaned up the kitchen. Most of that time was set-up and clean-up; the actual pitting only took a few minutes. I was amazed!

I did notice that the stoner jammed from time to time, but backing the crank up a bit, or just fiddling for a moment was enough to set it right. With a hand crank and no blades or sharp parts, I wasn’t worried about sticking a finger down the chute to move a stuck cherry or pit. It also didn’t always feed very effectively, but again, a quick poke with a finger, and things got moving again very easily. For a piece of equipment that was over 100 years old, I was pretty impressed.

A fair number of the smallest cherries went right through, and did not get pitted at all, leading to a certain amount of waste, and there were also a fair number of pits in the pile of pitted cherries. I suspect at least some of this is because the drought-affected cherries (and their pits) are just so small this year. I figure it was about 5 to 10 percent of cherries that did not get effectively pitted. Having said that, it was easy to go through the pitted cherries and remove the ones that were missed, as the pits were exposed and easy to get at. Even with me going through the pile of pitted cherries twice to look for missed pits, the process was very quick. I couldn’t have run a full batch through the steam juicer in that amount of time!

An image showing the results of pitting the cherries, illustrating the small but significant amount of waste - several small whole cherries, as well as some flesh, ended up in the pile of pits.
There’s some waste – a few of the smallest cherries went right through and ended up with the pits.

The only real downside to this pitter, besides the bit of waste in the pit pile, is that the cherries are pretty thoroughly mashed by the time they make it through the machine. To be honest, for my own uses, this is not an issue at all – nobody here cares what the cherries in their pie or jam look like. If you want pretty cherries for decorative uses, though, this won’t be a good solution for you.

A handful of pitted dwarf sour cherries after being run through the Enterprise No 16 Stoner.  The cherries are pretty mashed.
The pitted cherries are pretty mashed

For anyone else who has a few (or more than a few) sour cherry bushes, and wants to can larger volumes of pitted cherries or cherry jam, I really encourage you to find yourself one of these slick little tools. The drawbacks of a bit of waste and some fairly mashed up cherries are easily outweighed by the sheer speed of processing, even counting the time I spent going through the pitted cherries to check for missed pits. I can’t wait for a big harvest of sour cherries, now, and I’ll be canning up a ton of pie filling!

By Jess